Maintenance Program

• Improve/ Maintain your AC Systems: Efficiency, Performance, and Reliability
• Catch problems before they get worse
• Lengthen equipment life
• Maintain your manufacturer’s extended warranty

Membership includes:

• 2 in–depth, precision tune–ups per year, scheduled for your convenience
• 15% off all repairs
• Priority service (we move you to the top of the queue)
• Never pay extra for emergency service

These are not your typical "Clean & Checks." Each precision tune–up takes 1 – 1.5 hours to complete. Initial tune–up includes thorough inspection of duct system

Terms:

Transferability

Agreement is transferable. If you move, just let us know and we’ll pick up where we left off at your new home. We’ll also transfer the remainderof the agreement to whoever bought your old home.

Scheduling

One week before you’re due for your next tune–up, we’ll give you a call and schedule the tune–up for your convenience. If something comes up, please call and let us know. You can reschedule up to 3 times per inspection.

Expiration

All tune–ups must be used within 1 year of contract date (date agreement is signed)

Multiple Systems

Discounts on additional systems available only when they are located in the same building

33 Point Inspection:

1. Verify that the outside unit is level
2. Check and rinse condenser coil (if water available)
3. Remove leaves and debris from outside unit
4. Verify proper refrigerant charge
5. Visually inspect refrigerant circuit & all components
6. Check that service ports and valves are sealed
7. Check compressor
8. Check condenser fan motor
9. Verify the presence of and check the filter drier(s)
10. Verify type and proper operation of all metering devices
11. Check all capacitors
12. Check electrical components in outside unit; including contactor(s), control boards, relays, etc
13. Verify electrical connections are tight and clean
14. Verify proper breaker and wire sizes
15. Verify presence and proper operation of disconnect(s)
16. Inspect inside unit cabinet and clean
17. Check filter and replace or clean as applicable (customer provides replacement filter)
18. Clear condensate drain line and clean/ test condensate pump if present
19. Test drain overflow switch (float switch) if present
20. Check condition of evaporator coil
21. Determine temperature drop across evaporator coil
22. Check for air leaks from cabinet of inside unit and seal if present
23. Check for air leaks from plenum and sealed return
24. Check condition of inside unit’s stand
25. Check blower motor
26. Inspect blower assembly and blower wheel
27. Check electrical components in inside unit; including transformer, control boards, relays, etc
28. Check electric heat strips
29. Check all accessories; UV lights, premium filters, etc
30. Verify thermostat operation and mounting
31. Check safety controls where applicable
32. Check accessible ductwork for leaks
33. Clean equipment exterior